Scotch-Brite™ XDR Clean and Strip Bonded Cleaning Brush, XS-CB, 7S Extra Coarse, Config

Aggressively Cleans Metal Sheet or Coil
Scotch-Brite™ XDR Clean and Strip Bonded Cleaning Brush is one of the most aggressive-cutting XDR cleaning brushes. This dense brush helps remove rust, corrosion, light mill scale and other contaminants from metal sheet or coil.

Durable Construction Around a Steel Core
Scotch-Brite™ cleaning brushes are created by attaching abrasive discs to a cylindrical core and binding them together with resin. The individually bonded discs make Scotch-Brite™ XDR brushes more durable, providing 2 to 3 times longer life than standard Scotch-Brite™ cleaning brushes. Flap and cleaning brushes are constructed differently, so they may be used for different applications. Typical applications for cleaning brushes include coil cleaning prior to coating, deburring, scale and oxide removal and reclaiming sheet and coil. Scotch-Brite™ XDR Brushes have steel cores, so the brush stays sturdy when run on finishing equipment. The steel core adds a level of durability to the wheel.

Flexible Fibers Deliver a Sharp Cut
Scotch-Brite™ cleaning brushes are created by attaching abrasive discs to a cylindrical core and binding them together with resin. The individually bonded discs make Scotch-Brite™ XDR brushes more durable, providing 2 to 3 times longer life than standard Scotch-Brite™ cleaning brushes. Flap and cleaning brushes are constructed differently, so they may be used for different applications. Typical applications for cleaning brushes include coil cleaning prior to coating, deburring, scale and oxide removal and reclaiming sheet and coil. Scotch-Brite™ XDR Brushes have steel cores, so the brush stays sturdy when run on finishing equipment. The steel core adds a level of durability to the wheel.

Use with Coolant
Using a lubricant or coolant when cleaning is recommended. It helps wash away swarf and reduce loading on the abrasive, which, subsequently, extends brush life and enhances performance.

Note: When ordering a bonded construction cleaning brush, please allow an additional 1-1/4" to provide clearance for the 5/8" lock collars located at both ends of the brush. For instance, if you require 40" of usable brush width, order a 40" wide brush. This brush, however, when measured at the core will actually be 41-1/4" including the lock collars.

• Discs are resin bonded together on a circular core for increased durability
• Brushes are built around a steel core, resisting deflection under heavy pressure
• Made with silicon carbide mineral for sharp cutting action
• Open web resists loading, contributing to longer abrasive service life
• Open web responds to surface irregularities without altering geometry of the part